Set the YubiKey's FIDO2 application to be PIN-protected

Command APDU info

CLA	INS	P1	P2	Lc	Data	Le
00	10	00	00	data length	06 encoded info	(absent)

The Ins byte (instruction) is 10, which is the byte for CTAPHID_CBOR. That means the command information is in a CBOR encoded structure in the Data.

The data consists of the CTAP Command Byte and the CBOR encoding of the command's parameters. In this case, the CTAP Command Byte is 06, which is the command "authenticatorClientPin". The CBOR encoding is the following:

  A5         map containing five elements
     01      key (of key/value) specifying ...
        0x   ... PIN/UV protocol (x=1 for protocol one, x=2 for protocol two)
     02      key specifying ...
        03   ... subcommand, 03 = SetPin
     03      key specifying ...
        <>   ... CBOR-encoded COSE_Key, the platform's public key
     04      key specifying ...
        <>   ... authentication value
     05      key specifying ...
        <>   ... encrypted new PIN

Response APDU info

Response APDU for a successful set PIN

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	90	00

Response APDU when the input is not encoded correctly

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	6F	11

Response APDU when no protocol is given

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	6F	14

Response APDU when an unsupported protocol is specified

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	6F	33