Set legacy device config

Full command APDU info

CLA	INS	P1	P2	Lc	Data	Le
00	40	00	00	data length	encoded device info	(absent)

The data is encoded as four bytes

byte[0] is the touch eject value along with the interfaces
byte[1] is the challenge-response timeout
byte[2] and byte[3] make up the auto eject timeout (little endian)

byte[0] = 0x80 | interfaces if touch eject is true
byte[0] = 0x00 | interfaces if touch eject is false
the interfaces are
  0x00   OTP
  0x01   CCID
  0x02   OTP | CCID
  0x03   U2F
  0x04   OTP | U2F
  0x05   CCID | U2F
  0x06   All (OTP | CCID | U2F)

byte[3] and byte[4] make up the auto eject timeout
it is little endian
  decimal 300 is 0x2C 01
  decimal 555 is 0xFF 00

Response APDU info

Response APDU for successful setting the device info

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	90	00

Response APDU when sent to YubiKeys version 5 and later

Total Length: 2
Data Length: 0

Data	SW1	SW2
(no data)	69	00